BUSH / CAP SWINGARM 15x26x7.60mm CAP SWING ARM PIVOT 11012-1259 EACH - Clearance

Part No. 74-405.EACH 

Bush / Cap – For Swingarm Roller Pin

Type: Stepped bush with seal groove

Dimensions:

• Outer Diameter (OD): 25.98 mm

• Overall Width: 7.60 mm

Internal Bore (Stepped):

• Primary Inside Diameter: 19.95 mm

• Secondary Inside Diameter: 14.97 mm

• Step Depth: 2.80 mm

Seal Groove:

• Width: 1.80 mm

• Depth: 1.20 mm

Interpreted Structure

• The bush has a stepped internal bore:

  • 19.98 mm section

  • stepping down to 14.98 mm

• The step is 2.80 mm deep from one face.

• A seal groove (likely for an O-ring or dust seal) is machined on the outer surface.

Cross reference numbers ONLY. 11012-1259,
1984 KXT250-A1 Tecate SWING ARM ('84 A1)

1984 KXT250-A1 Tecate SWING ARM ('85 A2)

1985 KXT250-A2 Tecate SWING ARM ('84 A1)

1985 KXT250-A2 Tecate SWING ARM ('85 A2)

1987 KSF250-A1 Mojave 250 SWINGARM

1987 KXF250-A1 Tecate 4 SWINGARM

1988 KSF250-A2 Mojave 250 SWINGARM