TYGRIS GLOSS WHITE AEROSOL SPRAY PAINT 400ML ACRYLIC RAL9010

Acrylic-based gloss white aerosol topcoat in RAL 9010, suitable for professional finishes on most substrates with high opacity and excellent adhesion. Supplied in a 400 ml can with two interchangeable nozzles (direct and fan) for controlled application. Touch-dry and ready for overcoating in 15 minutes and fully dry in 24 hours. Image for illustrative purposes only.

Features

• Acrylic formulation for greater flexibility

• Gives excellent adhesion

• Compatible with most materials

• Can be applied over previously painted surfaces

• Wear and scratch resistant

• High opacity

• Supplied with two nozzles: direct spray and fan spray

• Consult the safety data sheet prior to use; suitable personal protective equipment should be worn

• Surface should be clean, dry, and grease-free; apply primer first for uneven surfaces, complete colour changes, or extra protection

• Prepare with a light sanding for good adhesion

• Shake can vigorously for 2 minutes

• Adjust nozzle for desired spray pattern; apply a number of light coats with a sweeping action from 25–30 cm

• Paint is touch-dry and ready for overcoating in approximately 15 minutes; fully dry within 24 hours

• After use, invert can and spray to clear nozzle

• Coverage: approximately 1.5–2 m² per can

• Dispose of used aerosols in line with local and national regulations

Specifications

• Type: Acrylic topcoat aerosol

• Volume: 400 ml

• Colour/Code: Gloss White, RAL 9010

• Appearance: Gloss white

• Odour: Typical paint aroma (organic solvents)

• Composition: Blend of pigments, nitro-cellulose binder, solvents, and hydrocarbon propellants

• Flash point: <0°C

• VOC content: Approx. 91%

• Solids content: Approx. 9%

• Maximum temperature in use: 110°C

• Storage: Below 50°C