MASTER CYLINDER LEFT POLARIS, 1910955, 2203060, ATV part for POLARIS SPORTSMAN 400 500 550 600 700 800

POLARIS

BIG BOSS 500 6X6 1998

HAWKEYE 300 2X4 4X4 2006-2010

MAGNUM 325 2X4 4X4 2000-2002

MAGNUM 330 2X4 4X4 2003-2006

MAGNUM 500 2X4 4X4 1999-2003

SCRAMBLER 500 4X4  2003-2012

SPORTSMAN 300 2008-2010

SPORTSMAN 400 4X4 2001-2014

SPORTSMAN 450 4X4 2006-2007

SPORTSMAN 500 4X4 6X6 1994-2013

SPORTSMAN 550  2010-2014

SPORTSMAN 550X2  2009-2014

SPORTSMAN 600  2003-2005

SPORTSMAN 700  2002-2007

SPORTSMAN 800  2005-2014

SPORTSMAN 850  2010-2014

SPORTSMAN 850XP  2009-2014

BRAKE CALIPER.

• It is a left front brake master cylinder
• Fit for 7/8 inch handlebar(approx. 22mm)
• The bolt size is M10 x 1.25mm

• High quality Aftermarket REAR Brake Cylinders.
• ATV Front Left Brake Master Cylinder For POLARIS SPORTSMAN 400 500 550 600 700 800

- Manufactured to exacting standards so the engine can be rebuilt with total confidence.
- Meets or exceeds OEM quality.
- Direct oem replacement.
- Please see image before ordering to avoid mistakes.
- Best value for money.
- ORO products are a high quality replacement part and carries our guarantee of your satisfaction.

It is a left front brake master cylinder.
Fit for7/8 inch handlebar(approx. 22mm).
The bolt size isM10 x 1.25mm.
Color: Black
Bolt Size: M10 x 1.25mm
Position: Front, Left
Applicable Vehicle: ATV
Application: Fit For 7/8 inch Handlebar(approx. 22mm)
Fitment:For POLARIS SPORTSMAN 400 500 550 600 700 800
Package Weight: approx. 688g
Here is How to install Lever as your reference :
Add Brake Fluid into the Reservoir, and it Requires DOT-3 fluid.
Check the Master Cylinder, Push the Piston in and out to remove the air.
Connected the Oil Hose, Air will enter the Lines and it must be removed.
Hold and Relax the lever again and again,to push the air out.
Please Note:
Our Master Cylinder Lever is Brand new sets, and not includes the Brake Fluid.
Use the Universal M10 x 1.25 Oil Hose.
Installing a Master Cylinder Lever requires dedicated expertise or persons. Please take the new parts to the Motorcycle repair shop or advised from the dedicated persons.
In the vast majority of cases, the Lever have no pressure, due to the Air fill with the Oil Hose or Master Cylinder when installed.