LIQUID ELECTRICAL TAPE RUBBER INSULATING CABLE WIRE COAT ADHESIVES SEALER BLACK 50g

Liquid electrical tape that forms a flexible, rubberised insulating coating for cables, connectors, and electronics, providing sealing and protection from moisture and contaminants for general electrical repair and waterproofing tasks.

Features

• Please see image before ordering to avoid mistakes
• Best value for money
• Easy to install; if unsure, please use a professional

Uses

• Sealing plug heads,
• Sealing wiring joints,
• Backs of ignition switches,
• Perfect for extreme waterproofing electronics,
• Put over soldered joins,
• Repairing automotive circuit boards,
• Repairing data cables,
• Repairing wire boxes,
• Sealing circuit boards and more.

Directions

• Clean the surface to ensure it is free of dust, oil and water.
• Wrap the glue evenly where it needs to be bonded.
• Let stand for 24 hours and wait for the gel to cure before use, if you want better effect then apply the glue again after curing.

Matters Needing Attention:

• Please save and use in well-ventilated environment.
• In case of contact with skin and eyes, please rinse with plenty of water.
• Please keep away from children.
• Keep away from sources of ignition.
• Shelf life: 24 months (8-16?), manufacturer date on bottom of tube, storage temperature and opening will affect the shelf life, as long as not y it will work.
• Tighten the bottle cap after use and store it in a sealed manner.
• Due to the diversity and uncertainty of the substrate, please conduct a practical test before use.