BUSH / CAP SWINGARM 17x27x8.5mm CAP SWING ARM PIVOT 11012-1790 EACH - Clearance

Part No. 74-415 (oro2u.com)

Bush / Cap – For Swingarm Roller Pin

Type: Stepped bush with seal groove

Dimensions:

• Outer Diameter (OD): 26.98 mm

• Overall Width: 8.50 mm

Internal Bore (Stepped):

• Primary Inside Diameter: 22.00 mm

• Secondary Inside Diameter: 17.07 mm

• Step Depth: 6.85 mm

Seal Groove:

• Width: 1.90 mm

• Depth: 1.10 mm

Interpreted Structure

• The bush has a stepped internal bore:

  • 22.00 mm section

  • stepping down to 17.07 mm

• The step is 6.85 mm deep from one face.

• A seal groove (likely for an O-ring or dust seal) is machined on the outer surface.

Kawasaki Motorcycle 1992 KX250 - KX250-J1 SWING ARM

Kawasaki Motorcycle 1992 KX125 - KX125-J1 SWING ARM

Kawasaki Motorcycle 1993 KX125 - KX125-J2 SWING ARM

Kawasaki Motorcycle 1993 KX250 - KX250-J2 SWING ARM

Kawasaki Motorcycle 1993 KLX650R - KLX650-A1 SWINGARM

Kawasaki Motorcycle 1993 KLX650 - KLX650-C1 SWINGARM

Kawasaki Motorcycle 1994 KX125 - KX125-K1 SWINGARM

Kawasaki Motorcycle 1994 KX250 - KX250-K1 SWINGARM

Kawasaki Motorcycle 1994 KLX650 - KLX650-C2 SWINGARM

Kawasaki Motorcycle 1994 KLX650R - KLX650-A2 SWINGARM

Kawasaki Motorcycle 1995 KX125 - KX125-K2 SWINGARM

Kawasaki Motorcycle 1995 KLX650R - KLX650-A3 SWINGARM

Kawasaki Motorcycle 1995 KLX650 - KLX650-C3 SWINGARM

Kawasaki Motorcycle 1995 KX250 - KX250-K2 SWINGARM

Kawasaki Motorcycle 1996 KLX650 - KLX650-C4 SWINGARM

Kawasaki Motorcycle 1996 KLX650R - KLX650-D1 SWINGARM