BEARING NEEDLE 12x16x10 DIRT RACING HK1210 93317-1128 HK1210-NEU EACH

BEARING NEEDLE 12mm x 16mm x 10mm HK1210

Drawn Cup Needle Roller Bearings Series HK

Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity.

Generally used directly on the shaft, which is hardened and ground. Can also be combined with an inner ring for shaft that is not hardened
Used when the housing bore cannot be used as a raceway for a needle roller cage assembly, but where a very compact and economic bearing arrangement is required

Cross reference numbers ONLY.
91053-719-005, 91101-PZ9-000,

This Honda 91101-PZ9-000 BEARING, NEEDLE (12X16X10)  

1983 XL600R A - LEFT CRANKCASE COVER / ALTERNATOR 1983 XL600R A - GEARSHIFT DRUM 1991 NT650 AC - RIGHT CRANKCASE COVER 1993 XR600R A - LEFT CRANKCASE COVER 1993 XR600R A - GEARSHIFT DRUM 1994 XR600R A - LEFT CRANKCASE COVER 1994 XR600R A - GEARSHIFT DRUM 1995 XR600R A - LEFT CRANKCASE COVER

1995 XR600R A - GEARSHIFT DRUM 1996 XR600R A - LEFT CRANKCASE COVER 1996 XR600R A - GEARSHIFT DRUM 1997 XR600R A - LEFT CRANKCASE COVER 1997 XR600R A - GEARSHIFT DRUM 1998 XR650L A - GEARSHIFT DRUM 1998 XR650L AC - GEARSHIFT DRUM 1999 CR500R A - CRANKCASE 2000 CR500R A - CRANKCASE