27 In stockBack to Top
PRODUCT INFORMATION
| Brand | Factory Image Racing |
|---|---|
| Size | M33x1.50 |
| Product Type | Fly Wheel Puller |
| Product Group | Workshop Equipment |
| Catalogue | ROAD, TOOLS |
DESCRIPTION
FLYWHEEL PULLER M33 - 33mm x 1.50mm Right hand tread.
Applications:
Husqvarna/Cagiva: All models with ignition point systems, 1978 and later, large flywheel motoplat ignitions C.D.I.
Bultaco: Femsa magneto, most late 1960’s ”“ 1970’s, Pursang Mx, El Tigre, Frontera, Bandito, Matador, Metrella, Sherpa series S125 and 200Mx, Sherpa “T”
Others: Ossa Mx, Montesa Mx, Zundap, Sachs, Pento and Puch, Many European Mo-Peds and Scooters.
Polaris Outlaw 500 2003-2007, Predator 500 and Adly 500 500S.
- Used for removal of the flywheel or rotor if applicable.
- Premium quality high carbon steel.
- Heat treated for strength and durability.
- Durable hot black oxide finish.
- FIR-BRAND products are a high quality. Tools, Accessories and Part all carries our guarantee of your satisfaction.
- Please check the image before ordering to avoid mistakes.
Tips on use.
- Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in.
- Use copper grease on the puller threads, for long life.
- Make sure the puller is fully screwed into the flywheel.
- After tightening use a hammer on the centre and tap to jolt free [not always need].
- If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel.
Part No. 00-106.DR [FACTORY IMAGE RACING] (Distributed oro2u.com)
FLYWHEEL PULLER M33 - 33mm x 1.50mm Right hand tread.
Applications:
Husqvarna/Cagiva: All models with ignition point systems, 1978 and later, large flywheel motoplat ignitions C.D.I.
Bultaco: Femsa magneto, most late 1960’s ”“ 1970’s, Pursang Mx, El Tigre, Frontera, Bandito, Matador, Metrella, Sherpa series S125 and 200Mx, Sherpa “T”
Others: Ossa Mx, Montesa Mx, Zundap, Sachs, Pento and Puch, Many European Mo-Peds and Scooters.
Polaris Outlaw 500 2003-2007, Predator 500 and Adly 500 500S.
- Used for removal of the flywheel or rotor if applicable.
- Premium quality high carbon steel.
- Heat treated for strength and durability.
- Durable hot black oxide finish.
- FIR-BRAND products are a high quality. Tools, Accessories and Part all carries our guarantee of your satisfaction.
- Please check the image before ordering to avoid mistakes.
Tips on use.
- Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in.
- Use copper grease on the puller threads, for long life.
- Make sure the puller is fully screwed into the flywheel.
- After tightening use a hammer on the centre and tap to jolt free [not always need].
- If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel.
Part No. 00-106.DR [FACTORY IMAGE RACING] (Distributed oro2u.com)
Factory Image Racing (FIR)
British Manufacturers of quality tools, accessories, titanium fixings and clothing
Factory Image Racing (FIR)
British Manufacturers of quality tools, accessories, titanium fixings and clothing
Spot Something Wrong?
Let us know.Click here
