FLYWHEEL PULLER M26x1.50 RH, EXTRACTOR, MX-12928

Flywheel Puller M26 x 1.50mm RH Thread External.

KTM ENDURO / OFFROAD /MX TWO-STROKE 125/250/300/360CC KTM MOTOPLAT

Cross reference numbers ONLY.
MP12, WPS 62-2002, MX-12928

Part No. 00-104.DR (oro2u.com) (Distributed oro2u.com)

• Fits most Husaberg:
  4 stroke 400cc, 501cc, and 600 cc off road models
  Fits most Husqvarna:
  Late 2 stroke models with CDI ignitions
  Fits most KTM:
  125cc, 250cc, 300cc, 360cc, 495cc XC and MX 2 stroke
  Fits most ATK ? Rotax models
  Fits most Classic:
  Bultaco, Ossa, Montesa, KTM, Husqvarna, Sachs, Puch, Zundap, Cannondale 440 speed models.

1996-1999 Husaberg FC400 1994-2000 Husaberg FC501 1993-1996 Husaberg FC600 1998-2000 Husaberg FC600 1996-2000 Husaberg FE400 1996-2003 Husaberg FE400E 1989-2000 Husaberg FE501 1996-2003 Husaberg FE501E 1993-1996 Husaberg FE600 2000 Husaberg FE600 1996-2000 Husaberg FE600E 2003 Husaberg FS400E 1998-1999 Husaberg FS600E,

Tips on use.
- Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in.
- Use copper grease on the puller threads, for long life.
- Make sure the puller is fully screwed into the flywheel.
- After tightening use a hammer on the centre and tap to jolt free [not always need].
- If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel.