VALVE TOOL FOR KAWASAKI, MOTION PRO 08-0019

Valve Tool Kawasaki. MOTION PRO 08-0019

Fits all KZ 750/ 900/ 1000/ 1100/ 1300 Models.

INSTRUCTIONS
Turn crankshaft so that the cam lobe is 180-degrees from the tappet Face. (Fig. 1
Insert the spring tool between the cam lobe and the shim. Push the tool in and pry down so that the tappet is forced away from the cam. (Fig. 2)
Insert the Tappet holder between the camshaft and the edge of the tappet. (Fig. 3)
Remove the spring tool and change the shim.
Replace the spring tool to remove the tappet holder and then remove the spring tool.

Note: The 5.5mm end of the tappet holder (Fig. 4) fits KZ1000, 1100 & 1300. The 7.0mm end fits the KZ750B-Series.

Part No. 00-227 (oro2u.com)

This item fits the following vehicles:
1983 Kawasaki KZ1000A/J  
1982 Kawasaki KZ1000A/J  
1981 Kawasaki KZ1000A/J  
1980 Kawasaki KZ1000A/J  
1979 Kawasaki KZ1000A/J  
1978 Kawasaki KZ1000A/J  
1977 Kawasaki KZ1000A/J  
1982 Kawasaki KZ1000B/K LTD  
1981 Kawasaki KZ1000B/K LTD  
1980 Kawasaki KZ1000B/K LTD  
1979 Kawasaki KZ1000B/K LTD  
1978 Kawasaki KZ1000B/K LTD  
1977 Kawasaki KZ1000B/K LTD  
2005 Kawasaki KZ1000C/P Police  
2003 Kawasaki KZ1000C/P Police  
2002 Kawasaki KZ1000C/P Police  
2001 Kawasaki KZ1000C/P Police  
2000 Kawasaki KZ1000C/P Police  
1999 Kawasaki KZ1000C/P Police  
1998 Kawasaki KZ1000C/P Police  
1997 Kawasaki KZ1000C/P Police  
1996 Kawasaki KZ1000C/P Police  

Motion Pro (USA)

Manufacture high quality motorcycle, ATV cables, tools and controls